Woodward Micronet+ Control System Engineering & Maintenance
Posted: Sat Jul 25, 2026 4:24 pm
Woodward Micronet+ Control System Engineering & Maintenance
Published 7/2026
Created by Omar Fatouh
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Level: All Levels | Genre: eLearning | Language: English | Duration: 8 Lectures ( 4h 52m ) | Size: 2.3 GB
Master Woodward GAP, MicroNet Plus hardware, Service tools & field procedures for turbine control systems
What you'll learn
Navigate and interpret Woodward GAP 3.0 application logic, including block structure, signal flow, and tunables Use Woodward service tools: AppManager, Control Assistant, SOS Servlink, Monitor GAP, Watch Window, and DVP Understand MicroNet Plus hardware architecture, including CPU, I/O modules, power supplies, and chassis layout Configure and troubleshoot MicroNet Plus communications: Modbus TCP, CAN J1939, and Servlink Collect and analyze DataLogs, capture high-speed data, and trend live values with Control Assistant Send and receive tunables safely on a running control and retrieve datalogs for troubleshooting Explain steam turbine and aeroderivative gas turbine control fundamentals, valve types, and driversRequirements
Basic familiarity with industrial control systems or instrumentation is helpful but not required A Windows PC is useful for following along with Woodward software tools, but not mandatory No prior Woodward or GAP programming experience needed - everything is explained from the ground upDescription
Woodward MicroNet Plus is the control platform behind thousands of steam turbines, aeroderivative gas turbines, and compressor trains worldwide - yet practical, field-oriented training on it is almost impossible to find. This course fills that gap.
Built from real field service experience, the course takes you from control fundamentals to working confidently with a live MicroNet Plus system. You will learn how governors and control loops work, how the MicroNet Plus chassis, CPU, and I/O modules are structured, and how the control communicates over Modbus TCP and CAN J1939.
The core of the course is hands-on software instruction. You will navigate real GAP 3.0 applications - reading block logic, tracing signal flow, and understanding tunables - across three dedicated GAP presentations plus a Tips & Tricks session and an iFix HMI walkthrough on an LM6000 gas turbine application. You will then work through every major Woodward service tool: AppManager, Control Assistant, SOS Servlink, Monitor GAP, ServLink with Watch Window, and DVP.
The final section covers the procedures you actually perform in the field: collecting data logs, trending live values, capturing high-speed DataLogs, sending and receiving tunables on a running control, and retrieving datalogs for troubleshooting.
The course is taught by a Principal Engineer with decades of hands-on experience commissioning and servicing Woodward controls on steam and gas turbines. No GAP programming experience is required - everything is explained from the ground up using real applications and real hardware.
By the end, you will be able to connect to a MicroNet Plus control, read its application logic, and carry out routine service tasks with confidence.
Who this course is for
Control systems, instrumentation, and field service engineers & technicians working with Woodward MicroNet Plus controls Steam and gas turbine operations and maintenance technicians who need to troubleshoot or tune Woodward controls Commissioning engineers and rotating equipment specialists moving into turbine control systems Engineering graduates seeking practical, hands-on turbine control system skillsHomepage Please Login or Register to see this code Please Login or Register to see this code